The Phiston MediaVise Rackmount SSD Destroyer (MVR-SSD) is the first and only commercially available, rack mountable solid-state drive and digital media destroyer
The MVR-SSD has a large versatile crushing chamber that allows it to destroy, disable and render inoperable, without any special adapters, a variety of miniaturized electronic devices and data storage media including USBs, PDAs, cell/smart phones, laptop HDDs and circuit boards. It will also crush and disable a limited number of computer HDDs (see specifications).
Simple, Safe 2-Step Operation
- 1. Insert Device
- 2. Press Crush
Device is crushed and ejected into a safe debris storage drawer. User never touches hazardous debris.
MVR-SSD Patented Crushing Plates below, and Destroyed Media
Designed specifically for SSD destruction, the large number and high density of teeth on the crushing plates ensure maximum destruction of memory chips and other electronic components in solid state devices.
Approved by the Royal Canadian Mounted Police (RCMP) for Secure Destruction of SSDs and Miniaturized Electronic Devices including USBs, PDAs and cell/smart phones containing or having processed:
a) Protected A or B, or Confidential Information. Prior clearing or overwriting is recommended but not required.
b) Secret or Protected C information; provided information was encrypted or first cleared or overwritten.
- Approved by the RCMP for Interim Destruction pending further Approved Destruction. The MVR-SSD renders HDDs, SSDs and Miniaturized Electronic Devices unplayable by ordinary means and is therefore approved as a risk mitigation measure for media in transit to, or awaiting additional destruction required for medium and confidentiality levels of information.
Approved by RCMP for secure destruction of HDDs containing or having processed:
a) Protected A and B information. Prior clearing or overwriting is not required.
b) Secret or Protected C information provided information was encrypted or first cleared or overwritten
- CE/EU Listed
Phiston MediaVise® Rackmount SSD Destroyer Technical Specifications
|Machine Weight (Excluding packaging and crating)
||180 lbs. – 110 volt model
196 lbs. – 220 volt model
||15.8 H x 28.4 L x 18.8 W
Occupies 9 standard rack unit spaces
||245 lbs. – 110 volt model
261 lbs. – 220 volt model
||25” x 39” x 36 ” (H x L x W)
|Power Requirements (voltage / frequency / current)
||220 Volts A.C. ±10%, 50/60 Hz, 7.5 Amps
110 Volts A.C. ±10%, 50/60 Hz, 15 Amps
Factory Configured for any international power supplies
|Maximum Media Size that can be put in the crusher
||Up to 5.75” x 1.25” x 4” (H x L x W). Depending on their sizes, up to 2 smaller SSD devices or 2 laptop HDDs at a time may be crushed provided they fit easily in the crusher (do NOT force in).
|Full Crushing Cycle Time (From loading device until safe ejection and containment of debris)
||Less than 30 seconds from loading until crushed media are safely and automatically ejected into debris bin. No attachments or adapters to install or change. No need to touch or manually remove sharp debris, or to clean the crushing chamber after each use.
||Dedicated SSD destroyer (no adapters required), cell phones, circuit boards, memory chips.
The MVR-SSD will also crush computer HDDs making them inoperable, however, this application is recommended only for emergency destruction of HDDs, and only in limited numbers as the hard metal casings of HDDs will quickly dull the sharp pyramidal teeth of the MVC-SSD.
||Debris is ejected directly into the included collection drawer that holds up to 75 destroyed SSDs
||50,000 Cycles MTBF. No blades to be replaced or sharpened
||On-call technical support service department; nationwide and international technical support team that can be deployed if and when repairs or maintenance needed.